High-tech Energy-efficient Guest Rooms with TIS- Energy management in hotels is a challenging issue for owners. From the desired temperature to their favorite light level, guests will probably return for another stay when they can customize their room to suit their preferences. However, providing these characteristics using old technology wastes lots of energy. For example, there are plenty of issues with the old card key switches. Guests can put any card within the old switches, or they might ask for more than one card. Even though hotel desk refuses to provide more than one card to a guest, she/he may claim to have lost the credit card.
The standard old technology of hotel card switch. There is also a lot of over consumption of lights and AC energy as a result of things running even though guests aren’t inside their rooms, and this may cause an economic loss for the owner. Of course, no hotel owner desires to prohibit guests from possessing a comfortable stay, nor do owners expect guests to get into a dark or cold hotel room. No one is to blame. Both guests and hotel owners have the authority to fulfill their interests.
Some hotel owners think if they separate the AC through the main network, less energy will be consumed, while some believe that motion sensors would be the solution. However, these approaches fail to resolve the problem. The AC is regarded as the energy-consuming device of all, and motion sensors could be nightmares because they only function based on movement detection, meaning that the AC and lights might go off while a guest is sleeping or reading a book. Nightmarish!
The TIS Automation Company offers the best solution for hotel guest rooms by introducing its innovative technology in a smart ceiling sensor: Energy Servant. Our Energy Servant blows past classic hotel card switches with its ability to detect human presence in a room. This ceiling-mounted sensor has many options, including a PIR motion sensor, a light harvest sensor, 2X digital inputs, infrared emitters appropriate for all split AC types, TV brands infrared codes, temperature sensor, 24X flags, and 32 lines of logic and timers.
TIS Energy servant, the brand new means for hotel economical technology. By installing this door sensor in the entrance to some room, connecting it towards the Energy Servant’s digital input, and programming the logic lines, the issue of room occupancy is entirely resolved.
The following logics could be defined with this sensor to manage room energy without any discomfort for guests:
Logic 1: When there is any movement inside the room, the occupancy mode is going to be on.
Logic 2: In the event the main door is closed and opened, a flag will switch on for just one minute to see if there is certainly movement in room. If no movement is detected after one minute, the device will activate energy-saving mode. This can be beneficial in situations each time a guest enters the room briefly. In energy-saving mode all lighting is off with the exception of a nightlight, which stays on for three hours in case there exists another guest having a nap. Also, the AC is definitely not switched off, but its temperature will be decreased by 2 degrees. This can help save energy over time.
Logic 3: In the event the energy-saving mode is enabled without any movement is detected for over 3-5 hours, the nightlight and AC will be switched off automatically. It is also easy to define lower temperature levels for that AC. In addition, the Energy Servant can turn the AC on/off when it understands that a balcony window/door is open. All of this requires is adding a magnetic contact linked to the balcony window/door and programming the preferred smart decision. The light harvest sensor helps save energy by wscgid balcony lights off when there is enough sunlight.
Another practical and beneficial ability of this sensor is its built in thermostat, which will help maintain the right temperature at all times. This is important to keep furniture fresh and intact. Also, in hot spots and whether or not the room is empty for a long time, humidity and bad smells will not become a problem within the room. This sensor may be programmed to alter AC to dry mode in the event the room temperature reaches or exceeds 28-30C degree. This can happen several times during the day if required. A comparable performance can be programmed in cold spots to avoid mold.
Another option of the smart device is TV control. In the event the hotel offers the guest with a room tablet, she/he will be able to control the room’s TV with it. This sensor was placed in 20 rooms inside the Fairmount Blue Mountain Hotel in Sydney. The effect was considerably enhanced energy management and several satisfactory comments from guests who enjoyed their luxurious stay at this hotel.
TIS offers the ability to meet both hotel owners and guests interests and requires with only a few items and then in by far the most power efficient way possible. For additional information or schedule a consultation, give us a call at www.tiscontrol.com